Advertisement
Making the right connections
Before connecting
® Connect the power cord last.
@ To prevent damage to the cords, connect and
disconnect by holding the plug and not the cord.
AUX/DAT REC and PLAY jacks
CD and DAT PIN-jacks
Connect the CD player and the DAT deck to these
jacks with the conventional PIN-plug cords. When
these jacks are being used, the CD and DAT OPTI-
CAL terminals and COAXIAL jacks are cut auto-
matically.
CAL terminals or COAXIAL jacks.
PHONO and PROCESSOR jacks
the Akai amplifier.
amplifier.
*
Refer to the operator's manual of the turntable
and the graphic equalizer, etc..
Ground terminals
If your turntable has a ground wire, connect it to
this terminal securely.
AM loop antenr
FM Antenna
Right channel
speaker system
Advertisement
