Advertisement
7 Controls
9 @¢000
©
t
POWER Indicator
Indicates the power is turned on. Also indi-
cates the speaker protection circuit opera-
tion. When the speaker protection system is
engaged, the indicator will be red.
POWER Switch
To turn the Akai amplifier on and off.
Remote control receiver
For remote control operation.
BALANCE Control
To adjust the left and right channel! balance.
A/B SPEAKERS Switches and Indicators
To select the speaker system.
DIRECT OPERATION Switch
To select the playback operation mode of the
Akai amplifier.
SAMPLING
FREQUENCY
Displays (44
kHz/48 kHz)
Shows which digital input signal has been
selected when using the digital interface con-
'nections.
44 kHz: CD player's signal is selected.
48 kHz: DAT deck's signal is selected.
@ @@82@6606
©
VOLUME (—dB: minus decibel) Control
To adjust the volume level. The O dB (zero
decibel) position is the maximum volume of
the amplifier..
MUTING Switch and Indicator
To reduce volume instantly during playback
without using the VOLUME control.
SUBSONIC Switch (ON =
/OFF
=
)
To turn the subsonic filter on and off.
LOUDNESS Switch (ON —
/OFF ™ )
For instant compensation of tone setting at
low volume.
Input select buttons and Indicators
To select the playback source you want to
listen to.
REC MODE SELECTOR Switch (PROCES-
SOR/OFF/SOURCE/DIGITAL)
For recording operation.
ror controls (SUPER BASS/BASS/TRE-
BLE
To adjust the super bass note (super bass),
bass note (bass) and high note (treble) levels.
Headphones (PHONES) jack
For headphone listening.
Advertisement
