Advertisement
|, Tape Dubbing
Copying a prerecorded cassette
tape:
Using the graphic equalizer
recording feature
Connect a 2nd cassette deck using the AUX/DAT
jacks of the Akai amplifier. If your cassette deck
has a dubbing feature, you can use it for easy oper-
ation.
o
8 ©
Notes for the recording operation
If you want to adjust the tone controls and bal-
ance control, set the DIRECT OPERATION
switch to OFF before recording. Recorded sig-
nals will not be affected by these adjustments.
Do not touch the input select button or REC
MODE SELECTOR switch of the Akai amplifier
and the level controls of the connected graphic
equalizer during recording. This will interfere
with the recording operation.
Refer to page 12 for the graphic equalizer
connection.
Press the AUX button.
Prepare the AUX deck for playback.
Prepare the TAPE deck for recording.
Begin recording.
Prepare the deck for recording, then begin
recording.
Advertisement
