System Installation - GE GX1S50R Owner's Manual & Installation Instructions

INSTALL THE FAUCET (CONT.)
Faucet Body
Base
and twist clockwise until it clicks into place.
NOTE:
is on the right or the left side.
If you want the faucet handle on the right, position
turning clockwise.
If you want the faucet handle on the left, position
turning clockwise.
Faucet
tightening with the Allen wrench provided
in the packet.
49-6000026
Installation Instructions
Gasket
Sink
Faucet
MOUNTING SYSTEM INSTALLATION
less will result in difficulty of removing filter canister.
Allow enough space on either side of the system for
A. PREFERRED INSTALLATION
(Mounting Using the Screw Provided [Fig. 4])
or solid firm surface.
NOTE: If mounting to drywall, with no stud, a
B. OPTIONAL INSTALLATION
(Mounting Using the Mounting Tape Provided
[Fig. 5])
(If mounting to drywall, the screw should be
used also).
2. Clean wall surface to remove any dirt, oil or
grease and dry thoroughly.
piece.
4.
the cleaned wall surface, applying firm pressure
to the entire piece.
tape
Fig. 4