Advertisement
RECEIVING FM SIMULCAST TV PROGRAMS
By combining a TV set and a VCR (or TV tuner), you can receive FM
1. Select the desired TV program with the TV set.
simulcast TV programs (stereo TV sound transmitted from an FM
2. Tune in the desired FM simulcast TV program on the receiver.
radio station) while viewing the video portion on your TV.
;
3. Adjust the volume and tone controls as desired.
OPERATING THE AUDIO/VIDEO COMPONENTS
Press the power switch to the ON position, and turn on the power to
the other components
you wish to use (for example, TV, VCR,
cassette deck, etc.)}.
PLAYBACK
1. Use the input selector buttons to select the desired program
source.
To watch a video cassette tape on
VCR 1
the VCR connected to VCR 1 jacks.
To watch a video cassette tape on
VCR 2
the VCR connected to VCR 2 jacks.
When watching a video played back
on a video component connected to
VIDEO
the VIDEO IN jacks.
To watch the TV picture from a TV
tuner connected to the TV/SAT jacks.
TMP SAT
To watch a LaserDisc.
LD
To listen to a tape on the cassette
TAPE
deck connected to TAPE 1 jacks.
PE 1
To listen to a tape on the cassette
deck (or digital audio tape deck)
connected to TAPE 2 MONITOR jacks.
To listen to records.
To listen to compact discs.
TAPE 2 MONITOR
*\f you select a music source other than TAPE 2, switch OFF the
TAPE 2 MONITOR.
2. Operate
the appropriate
audio/video
component*to
play
back the program source.
© For a video source, switch the TV connected to this unit to the
video input mode.
3. Adjust the volume and tone controls as desired.
© Refer to page 20 for details concerning surround operation.
Refer
to
page
20
for
details
concerning
sound
quality
adjustment.
18
<ARB1477>
Advertisement
