Advertisement
FRONT PANEL FACILITIES
say OS
TeaTe
@ Remote sensor
@ POWER STANDBY/ON switch/STANDBY indicator
This is the switch for electric power.
ON
: When set to the ON position, power is supplied and
the unit becomes operational.
STANDBY
: When
set to STANDBY
position, the main power
flow is cut and the unit is no longer fully operational.
A minute flow of power feeds the unit to maintain
operation readiness.
The STANDBY
indicator lights when the power is STANDBY, and
goes out while ON,
[Timer ON/OFF possible]
When the unit is switched ON, ON/OFF control can be performed by
means of the optional timer.
NOTE:
When
the power is initially turned ON, muting will be applied to
prevent sound from being output for about 5 seconds.
@ AUTO
SOURCE
CONTROL/MEMORY
buttons
(See page 22)
1, 2 buttons:
These
buttons
are for memorizing
and
recalling your
current
settings. Both 1 and 2 can be used to memorize settings. If you
connect another component, such as a CD player, to the CONTROL
OUT jack on the rear panel, the signals to switch power on and start
play are also transmitted.
MEMORY:
Use when memorizing settings to a 1, 2 button.
Pressing this button will result in the memorization of the current
broadcast band, reception frequency, and MPX mode.
14
<ARB1477>
@® RESET button
Use this when normal operation becomes impossible because of
external influences such as static electricity or lightning, or when
operation is impossible even when operation buttons are pressed.
Press this button to return to normal operating conditions. The input
selector automatically
switches to TUNER
(FM 87.5 MHz), and
SPEAKERS A and B switch off.
If you press this button when the power is ON, the unit switches to
POWER
STANDBY,
and the entire contents
of the memory
are
erased.
@® INPUT SELECTOR buttons
VCR 1
: Press when performing playback on a first VCR unit.
VCR 2
: Press when performing playback on a second VCR
unit.
VIDEO
: Press
when
performing
playback
on
a
VCR
connected to VIDEO INPUT jacks.
TV/SAT
: Press when using a TV tuner connected to the TV/SAT
jacks.
LD
: Press when performing playback on an LD player.
TAPE 1
: Press when
performing
playback
on a cassette
deck.
TAPE 2 MONITOR
: Press
when
performing
playback
on
a second
cassette deck and when monitoring recording.
PHONO
: Press when playing records on turntable.
TUNER
: Press when listening to radio broadcasts.
cD
: Press when playing compact discs on a CD player.
Advertisement
