Advertisement
FRONT PANEL FACILITIES
@® DIRECT button
@ TUNER JOG (See page 17)
Use to tune into a broadcast.
SUPER BASS button
Press this button when you want to boost bass.
@ MUTING button
@ RETURN button
@ MASTER VOLUME control
@ PHONES jack
@ SPEAKERS buttons (A, B)
ON/OFF switches for the A and B speaker systems.
@ Display section (See page 16)
@ TUNING MODE buttons
FM/AM
: Use this to switch between FM and AM frequency
band reception.
MPX MODE : Use to select the auto stereo mode
or monaural
mode
when
listening
to
FM
broadcasts.
The
monaural mode has been selected when the FM
MONDO indicator in the display section is lit.
Auto stereo mode:
Normally, leave in this mode for reception. When a
stereo
FM
broadcast
is
received,
it will
be
automatically reproduced in stereo.
Monaural mode:
;
When
receiving distant stations or stations with
weak broadcast signals, the input signal may be
weak, thus resulting in increased noise during FM
stereo broadcasts. In this event, setting the receiver
to the monaural mode will reduce the noise. In this
case,
however,
FM
stereo
broadcasts
will
be
reproduced in monaural sound.
NOTE:
This button
has no
effect on
reception
of AM
broadcasts.
preset
mode,
and
the
displayed
frequency
is
memorized in the selected station. (Frequency and
Station indications stop flashing and stay lit.)
DOLBY PRO LOGIC:
Switches DOLBY PRO LOGIC SURROUND
on.
DSP MODE:
Each time you press it, the mode and the display indications change
as follows.
the [JC] [paay surnouno} mark.
@ BASS control
@ TREBLE control
@ BALANCE control
L: Decreases the sound on the right side.
R: Decreases the sound on the left side.
Usually, left and right volume levels should be the same.
15
<ARB1477>
Advertisement
