Transmitting Stored Dtmf Numbers - Kenwood TM-261A Instruction Manual

Press a single key [0] ~ [9] to select a DTMF memory
channel.
for approximately 1 second, then the dispiay for entering
DTMF numbers is restored.
Press [VFO] to restore the Menu B Scroll display, or
wait for several seconds to restore the frequency
display.
1
2
3
Press [F]+ POWER ON to access Menu B.
Select "DTMF.Ck" {page 17}.
Press [VFO].
* The display for confirming DTMF numbers appears.
5 Press [VFO] to restore the Menu B Scroli display, or
wait for several seconds to restore the frequency
display.
TRANSMITTING STORED DTMF NUMBERS
To transmit a stored DTMF number, follow the procedure
below.
1 Press microphone [PTT]+[PF].
* The display for selecting a DTMF memory channel
appears.
the Display accompanied by DTMF tones from the
speaker.
¢ After the transmission, the frequency display is restored.