Table of Contents
Advertisement
Available languages
Available languages
g ) Take care against injury to feet and hands from the
cutting means.
h ) Always ensure that the ventilation openings are kept
clear of debris.
i ) When using the brush cutter there is a risk of
kickback if it contacts a solid object (tree trunk,
branch, or rock). The unit will kick to the opposite
direction of the brush cutter blade's rotation.
j ) Remove any objects that may cause kickback, such as
branches and rocks.
k ) Check for loose fasteners and damaged parts, such as
cracks in the cutting attachment.
Maintenance and Storage
a ) Disconnect the machine from the power supply
(i.e. remove the plug from the mains, remove the
disabling device or removable battery) before carrying
out maintenance or cleaning work.
b ) Use only the manufacturer's recommended
replacement parts and accessories.
c ) Inspect and maintain the machine regularly. Have
the machine repaired only by an authorized repairer.
d ) When not in use, store the machine out of the reach
of children.
e ) Use blade cover for metal blades during transport
and storage.
f ) Clean before storing, including the use of guards on
cutting attachments with metal blades.
ADDITIONAL SAFETY INSTRUCTIONS FOR
GRASS TRIMMERS / BRUSH CUTTERS
WARNING: Cutting elements continue to rotate after
the motor is switched off.
•
Wear long trousers to protect your legs.
•
Before using the appliance, check that your cutting path is
free from sticks, stones, wire and any other obstacles.
•
Only use the appliance in the upright position, with the
cutting line near the ground. Never switch the appliance on
in any other position.
•
Move slowly when using the appliance. Be aware that
freshly cut grass is damp and slippery.
•
Do not work on steep slopes. Work across the face of slopes,
not up and down.
•
Never cross gravel paths or roads while the appliance
is running.
•
Never touch the cutting line while the appliance is running.
•
Do not put the appliance down until the cutting line has
come to a complete standstill.
•
Use only the appropriate type of cutting line. Never use
metal cutting line or fishing line.
•
Keep hands and feet away from the cutting line and blade
at all times, especially when switching on the motor.
•
Before using the appliance and after any impact, check for
signs of wear or damage and repair as necessary.
•
Take care against injury from any device fitted for trimming
the filament line length. After extending new cutter line
always return the machine to its normal operating position
before switching on.
•
Close supervision is necessary when the appliance is used
near children.
•
This appliance is not intended for use by young or infirm
persons without supervision.
•
This appliance is not to be used as a toy.
•
Use in a dry location only. Do not allow the appliance to
become wet.
•
Do not immerse the appliance in water.
•
Do not open the body casing. There are not user‑
serviceable parts inside
•
Do not operate the appliance in explosive atmospheres,
such as in the presence of flammable liquids, gases or dust.
•
When the appliance is stored or transported in a vehicle
it should be placed in the boot or restrained to prevent
movement following sudden changes in speed or direction.
•
When not in use, the appliance should be stored in a dry,
well ventilated place out of reach of children.
•
Children should not have access to stored appliances.
Additional Safety Information
WARNING: Never modify the power tool or any part of
it. Damage or personal injury could result.
WARNING: ALWAYS use safety glasses. Everyday
eyeglasses are NOT safety glasses. Also use face or dust
mask if operation is dusty. ALWAYS WEAR CERTIFIED
SAFETY EQUIPMENT.
WARNING: Use of this tool can generate and/or
disperse dust, which may cause serious and permanent
respiratory or other injury. Always use approved
respiratory protection appropriate for the dust
exposure. Direct particles away from face and body.
WARNING: Always wear proper personal hearing
protection during use. Under some conditions and
duration of use, noise from this product may contribute
to hearing loss.
CAUTION: When not in use, place tool on its
side on a stable surface where it will not cause a
tripping or falling hazard. Some tools with a large
battery pack will stand upright but may be easily
knocked over.
Air vents often cover moving parts and should be
•
avoided. Loose clothes, jewelry or long hair can be caught
in moving parts.
Safety Of Others
•
If the power cord is damaged, it must be replaced
by a distributor or Service Center Authorized by the
manufacturer.
•
Children must be supervised to ensure that they do not play
with the tool.
•
This tool is not intended for use by persons (including
children) with reduced physical, sensory and mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction regarding
use of the appliance by a person responsible for their safety.
ENglish
29
Advertisement
Table of Contents
