Default Locale Setting; Type And Edit Text; Navigate In Text Boxes - UTStarcom SideKick II Reference Manual

Default Locale Setting

Change the default locale for your device from the Locale Settings screen:
1
Press
JUMP
then select Settings > Locale. The Locale screen appears.
2 All available languages (locales) are listed in the Language pop-up menu.
Select the language you wish to set as your default. If your pop-up menu
is dimmed, then you have no other languages available.
Note
Your device must restart before a language change will take effect!
3 In the Keyboard Mapping pop-up, select a language (locale) to which
you want your keyboard mapped. If you change the mapping, what
appears on the screen when you type may no longer correspond to the
characters printed on your keyboard. If this pop-up menu is dimmed, then
you have no other mappings available.
4 Press
DONE
device will restart if you have changed your default language.

Type and Edit Text

It's easy to type and edit text in any text box using the keyboard and the
advanced text editing features described below.

Navigate in Text Boxes

Use the control buttons and keyboard to navigate within a text box:
To move character-by-character, press the D-pad up/down or left/right.

To jump to the beginning/end of a word, press ALT + D-pad left/right.

To jump to the beginning/end of a line, press ALT +

To jump to the top/bottom of a text box. either:

– Press
– Press ALT + D-pad up/down.
to open the Jump screen. Press
to save your setting and dismiss the Locale screen. Your
+ or , or
MENU
to open the menu,
MENU
or .
Device Basics 25