Device Privacy Code - UTStarcom SideKick II Reference Manual

To change the default key guard idle time setting:
1
Press
JUMP
Settings > Key Guard & Security.
2
In the first section of the Key Guard & Security screen, "Key Guard", the
key guard idle time pop-up is selected by default. Press the wheel to open
the pop-up. Highlight a "guard" time, then press the wheel to select it.
3 Press
DONE
Note Your device will still receive calls and messages while in key guard mode.

Device Privacy Code

If you want to secure your device from unauthorized access once your device
has gone into key guard mode, you will first need to set up a privacy code:
1 Press
JUMP
Settings > Key Guard & Security.
2 On the Key Guard & Security screen, scroll down to highlight
3
Enter a three-digit code using the keyboard or the dial:
At the prompt, re-enter your code to verify.
4 A "New Combination Enabled" message appears. Select OK.
5 Press
DONE
You can still make emergency calls from the key guard screen even if privacy
Note
code is enabled.
to open the Jump screen. Press
to save your settings and return to the Jump screen.
to open the Jump screen. Press
, then press the wheel to select it.
to save your settings and return to the Jump screen.
then select
MENU
then select
MENU
Device Basics 23