Table of Contents
Advertisement
Backlighting
For better screen visibility in poor light, enable backlighting:
1
Press
then select Settings > Battery & Display.
2
Select the Automatically turn on when using device check box to
enable backlighting. Select the length of time you want backlighting to
stay on from the Turn off after pop-up menu.
3
To use the device's light meter to detect when the backlight is not needed,
scroll down and select the Use backlight only when needed check box.
4
Press
Key Guard Mode
You can effectively lock the controls by entering key guard mode. By default,
your device is set to enter key guard mode after one minute of idle time.
To enter key guard mode, do the following:
1
Press
scroll to highlight Key Guard, then press the wheel. You can also enter
key guard mode quickly by pressing and holding
2
Your device control buttons lock and the key guard screen appears.
3
To unlock and wake the device, press
privacy code (see next section), type it at the prompt. You can also wake
the device by opening the screen.
To prevent display damage, after your device has been in key guard mode for
two hours, a screen saver will appear. To dismiss the screen saver, press any
key or open the device.
22
Device Basics
to open the Jump screen. Press
JUMP
to save your settings.
DONE
to open the Jump screen. Press
JUMP
to open the menu,
MENU
to open the menu,
MENU
for two seconds.
DONE
+
. If you have set a
MENU
DONE
Advertisement
Table of Contents
