Sennheiser HME 26-600 Service Manual page 18

5.2.8 Assembly of the latch for headband
Note:
After the removal the latch can be damaged or get lost. Recommendation: Do not
install this removed latch again. Use new headband latches.
1. Press the latch for headband (030) completely into the notch of the headband.
Note:
Ensure the correct direction/postion of the notch. The side with the notch shows to
the cable channel side of the end piece of the headband (010).
2. Move the end piece of the headband (010) up and down. Ensure that the cable
is completely inserted in the end piece of the headband (010).
End piece with notch
for cable routing
Latch
HMD/HMDC/HME 26 Broadcast
08/2011 18/23