Sennheiser HME 26-600 Service Manual page 17

5.2.7 Assembly of the yoke
1. Completely move down the end piece of the headband (010) to the round/oval
end piece stopper.
Caution:
Do not install the headband cable with a sharpen screwdriver. You can damage the
headband cable. Use only rounded/stub tools.
1. Press the headband cable completely into the headband channel of the end
piece (010).
2. Put the yoke (020) to the end piece of the headband (010).
3. Press the headband cable into the left part of the headband channel of the
yoke (020).
End piece stopper
Cable channel
of the end piece
Yoke
Cable channel
of the yoke
Headband cable
HMD/HMDC/HME 26 Broadcast
08/2011 17/23