Kawai K4 Owner's Manual page 79

82 82
3-1. MIDI DATA DUMP
The K4/K4r can execute MIDI Data Dumps of individual patches, blocks of patches, or the entire patch memory.
Data control is easy when a sequencer with a MIDI Data Dump function such as the Q-80 is used. With the Q-80, data
equivalent to about 40 times the storage capacity of the K4/K4r can be saved on a 2DD disk.
Parameter *SGL
Dump Data
SINGLE 1Patch 64Patch
MULTI 1 Patch 64Patch
DRUM
EFFECT
[Comment [+e i
*1 Selected Patch
*2 INT (Internal) or EXT (Card)
Before performing the MIDI Data Dump, select the patches set for the EFFECT (OUTPUT) Settings or Patches and Blocks
which you wish to transmit.
Example: Transmit EFFECT setting #17
<Procedure>
s Choose SINGLE or MULTI PLAY, press , and select the following
screen.
Select "17" with the VALUE Slider or C+ves )and (_-x0_).
Press several times to display the MID! Data Dump Select screen.
Select "EFFC" with the VALUE Slider or C-ves) and C-0_).
Press once to display the MIDI Data Dump Select screen.
Note: If necessary, ready the connected instrument for receiving the MIDI Data
Dump.
(5) After you press C+ ves), you will be asked if you are sure — press again
to confirm. The message "COMPLETED!" will be displayed when the dump
has finished. MIDI CABLE
Refer to the 'DATA DUMP" command for the Q-80 Owner's Manual for the Q-80.
82 82