67
67
DRUM SECTION
m EDIT Screen
Selected Key
Parameter
Value
mw EDIT Procedure
Common Parameters
@ VOLUME
(Value: 0 to 100)
This controls the volume of the entire DRUM Section.
Adjust the differences in
volume for SINGLE Patch and MULTI Patch Sections so that there is no unnatural
change in loudness when the DRUM Section is called up.
Note: The
also works during DRUM EDIT to allow the sound being created
COMPARE
.
Soe
to be compared with the sound before editing.
@ MIDI RCV Ch (Receiving channel)
(Value: 1 through 16)
CPLA
Set the MIDI receiving channel for the DRUM Section.
@ VEL (Velocity) DEPTH
(Value: —50 to 0 to +50)
Sets the depth of level change according to how hard the key is struck.
67
67
=
ram
Lid
=
=]
cc
=