Kawai K4 Owner's Manual page 29

32 32
m Choosing a Source to Edit
Each Source must be set individually for SINGLE Patches.
<Procedure>
(1) Select the Source to be edited using the Source Select switches 1, 2, 3, or 4.
Ct) ese
Source 1 Source 2 Source 3 Source 4
(2) To listen to a Source's sound individually, use the Source Mute switches 9,
10, 11, and 12 to mute the other Sources temporarily.
Co)
Source 1 Source 2 Source 3 Source 4
(3) When editing filter parameters, select the desired Filter using the Source
Select switches 1, 2 (for Filter 1) and 3, 4 (for Filter 2) as below:
:
Filter 1 Filter 2
m Display During Editing
Source 1 Output =P: PCM Wave
Source 2 Output C: DC Wave
Source 3 Output -: Mute/Level 0
Source 4 Output
Edit Group
Parameter Value
32 39