Kawai K4 Owner's Manual page 4

Contents of Panel Nomenclature
i PLAY Mode
: Select Internal or Card MULT! Patch (P. 12)
: Select Internal or Card SINGLE Patch (P. 11)
GD Gs : Select and Set LINK Play (P. 15)
PLAY : Return to PLAY mode
™ SINGLE EDIT Mode
: Enter EDIT mode (P. 28-33)
: Select Value (P. 28)
PREV : Return to Previous Parameter (P. 28)
RECALL : Compare with Sound before Editing (P. 28)
: Perform WRITE, followed by SAVE and LOAD (P. 26)
Ce) Cz). Cs C4) = Select EDIT Source (P. 32)
Co) Ce) C) 'Select Source Mute (P. 32)
Cs) : Select Source mode, Pressure, Wheel, etc. (P. 34)
ee : Select Velocity, KS (Keyboard Scaling) Curve, etc. (P. 43)
: Set Volume Envelope (P. 48)
: Select Cutoff, Resonance, etc. (P. 52)
E> : Change Tuning and Tone with LFO (P. 40)
ae : Set Waveform and Pitch (P. 46)
Cr) : Control Volume with Velocity and KS (P. 49)
: Change Tone in real time (P. 54)
DCF MOD
PLAY : Return to PLAY mode
m@ MULTI EDIT Mode
—— SECTION SELECT——— : Set Instrument (SINGLE) to be edited (P. 60)
—— SECTION MUTE ~—— : Set MULTI Section Mute (P. 60)
Ca) —: Set MULTI Instrument (SINGLE) (P. 61)
: Set Play Range (P. 62)
: Set MIDI Channels for MULT! Sections (P. 63)
Co) : Set Instrument Level and Output Destination (P. 64)
PLAY : Return to PLAY mode
@ Other EDIT Modes
: Set DRUM Section, Manual Drums (P. 66)
: Set EFFECT (K4 only) (P. 24, 71)
: Set Panpot or Individual Output (K4r only) (P. 24, 71)
: Set Tuning and MIDI (P. 77)
: Set MIDI Data Dump contents and Execute Dump (P. 82, 88)
PLAY —: Return to PLAY mode
Basic
Control
EFFECT/ |
OUTPUT I
EDIT
ADVANCEM
USER