Removal Of The Gearchange Mechanism; Disassembly Of The Gearchange Mechanism - Ducati SUPERBIKE 848 MY 2008 Manual

Gearchange mechanism
Parts catalogue
FRAME
Important
Bold reference numbers in this section identify parts not shown in the figures alongside the text. Refer to the
exploded view diagram.

Removal of the gearchange mechanism

Operation
Remove the left-hand fairing
Unscrew and remove the pivot bolt (5) securing the gear pedal (1) and recover the O-ring seals (6).
Unscrew and remove the bolt (13) securing the lever to the gearbox shaft.
Withdraw the lever (14) complete with the gearchange control assembly.
Notes
Mark the position of lever (14) relative to the gear selector shaft.
To remove the lever (14) from the gearchange assembly, unscrew the bolt (17), recover the nut (15), and then slide
off the lever (14).

Disassembly of the gearchange mechanism

Refer to the exploded view at the beginning of this section for indications on disassembly and renewal of gearchange
file:///C|/848/wsm/en/848_08_F_05_6_00.30.1.html (2 of 3) [11-6-2008 0:34:29]
Section reference
E 2, Removal of the side fairings
WWW.PlanDeGraissage.ORG