Gearchange pedal adjustment (fig. 26)
Gear change pedal position relative to the footpeg may be
adjusted to suit rider preferences.
There are three different adjustments available:
Approximate adjustment of pedal position
2
Fit a wrench into the socket (1) to lock out removable
E
linkage rotation and slacken the locknut (3). Release and
remove the screw (2) and adjust the linkage axially so as
to set the gear change pedal in the desired position. The
linkage has 4 positions determined by the axis of the
screw (2). After adjustment, torque screw (2) to 8 Nm and
1
3
locknut (3) to 10 Nm.
fig. 26
Fine adjustment
Fit a wrench into the socket (1) to lock out removable linkage
rotation and slacken the locknut (3). Rotate the linkage by
working the socket (1) so as to set pedal in the desired
position. When finished, torque locknut (3) to 10 Nm.
Combined adjustment
Both adjustment techniques may be used together.
Make sure to torque locknut (3) to 10 Nm and screw (2)
to 8 Nm when finished.
32