Throttle twistgrip
Adjusting the throttle cable
For instructions on how to adjust the throttle cable, see Sect. D 4,
Removal of the throttle twistgrip
Remove the end plug (3) from the handlebar.
Peel back the rubber sleeve (A) protecting the throttle control cables.
Undo the screws (7) of the twistgrip (1) and open the housing.
Disconnect the throttle opening (5) and closing (6) cables by unhooking the cable ends (B) from their seats.
Remove the throttle twistgrip (1) from the right-hand handlebar.
Notes
To renew the throttle cables, disconnect them from the throttle body as described in Sect. L 6,
and throttle
body.
file:///C|/848/wsm/en/848_08_F_01_6_00.26.1.html (2 of 4) [11-6-2008 0:34:27]
WWW.PlanDeGraissage.ORG
Adjusting the throttle
cable.
Refitting the airbox