Learn commands
Transfer commands from a component remote to the MXW-920i
using the Learn feature.
Erasing learned data
Remove any unwanted learned commands from the remote.
Performing a Factory Default
MXW-920i O
WNER
Device - Copy a command to a device
Button - Copy a command to a button
To exit, press Main.
Button - Erases a specific command resid-
DevBtn - Removes any learned commands
Device - Erases all learned commands for
All - Erases all learned data on the remote.
To exit, press Main.
WARNING: DO NOT PROCEED
UNLESS SPECIFICED BYYOUR
CUSTOM INSTALLER!THIS
SECTION WILL ERASE ALL DATA
ONTHE REMOTE.
PressingYes will format the remote's disk
and set it back to the factory settings.
To exit, press No or Main.
Page 9
'
M
S
ANUAL
button.
within a device.
ing on a button within a device.
on a device button label such as
Cable.
one device.