Table of Contents
Advertisement
Step No.
Configuring MPE
Prompt and Response
25
TRANSMISSION SPEED?
(in characters per second)
250, 300, 600, 1200, 2400, 3600, 4800, or 7000
(DS and X. 25)
(RJE and MRJE)
(Note: The transmission speed you specify is ignored for modems that provide internal
clocking signals. This feature· allows modems of different speeds to be used without
reconfiguring the operating system.
It
also allows the console operator to change the
speed of hardwired lines through the use of the ;SPEED= parameter when the line is
opened.)
26
TRANSMISSION MODE? 0
or
1
o
=
Full Duplex
1
=
Half Duplex
(DS, RJE, MRJE, amd X. 25)
(Note: Subtype 3 requires full duplex, except when the INP is hardwired to an SSLC.
For hardwired INP-to-SSLC, always configure
both
devices as Subtype I and
Transmission Mode
1.)
27
PREFERRED BUFFER SIZE?
0-1024
(in words)
(OS -.... 1024 recommended;
(RJE, MRJE, IMF, and X.25 override this
option)
28
DRIVER CHANGEABLE? NO
29
DRIVER OPTIONS?
0
38
DRIVER NAME? IOINPO
Prompts 39 through 42 appear only when subtype 0 has been specified in prompt 13.
MRJE, and X.25)
(DS, RJE,
39
PHONELIST?
YES
or
NO
(RETURN)
(OS, RJE, and X. 25)
(MRJE and IMF)
A-5
Advertisement
Table of Contents
Troubleshooting
