Clarion NX700 Service Manual page 26

2-7. Installation of Inner Escutcheon
WORKING DIAGRAM
B
A
processed
Inner Escutcheon
2-8. Installation of Upper case
WORKING DIAGRAM
(4) (1)
B
(2)
hole
Convex part
2-9. Installation of Panel ASSY
WORKING DIAGRAM
C
B
A
E
D
NX700/NX700E
WORKING PROCESS
1. Insert FPC(A) in Flex-socket
of the front side on Main unit,
and lock by the hands.
2. Fix it with IT screw(B).
3. Attach it putting the tab of lower side of
processed Inner Escutcheon
on Main unit.
C
4. Fix it with screw(C).
WORKING PROCESS
B
1. Attach upper case on Main unit,
(3) and fix it with machine screw(B).
A
WORKING PROCESS
1. Set the Slide roller of PANEL-ASSY
in the ditch on the Inner Escutcheon
one by one side, put on Panel.
2. Unlock Flex-socket of
rear side of Panel.
Insert Flex-PWB of Main unit in it,
and lock.
3. Attach Panel cover on Panel,
and fix it with special screw(C).
4. Turn it so that the right side of Main unit
may become upper side
while holding PANEL.
5. Align the slide rail with the screw hole
of PANEL, attach the bush(D)
G
and fix with special screw(E).
F
6. Turn it so that the left side of Main unit
may become upper side.
7. Align the slide rail
with the screw hole of PANEL,
attach the bush(F)
and fix with special screw(G).
No. PARTS CODE
A 039-3448-00
B 780-2604-50
C 780-2604-52
No. PARTS CODE
A 310-1831-02
B 714-2604-8B
No. PARTS CODE
A -----------
B 039-3502-00
C 716-1851-00
D 335-7903-00
E 716-3577-00
F 335-7903-00
G 716-3577-00
- 26 -
WORKING POINT
Q'TY
1 * Fit at 2 dowels.
1
* Fit at 4 tabs of lower side.
4
WORKING POINT
Q'TY
1 * Fit at convex part of
4 Inner Escutcheon
and hole of upper case.
* Follow screw sequence. (1 to 4)
WORKING POINT
Q'TY
1
1
2
1
1
1
1