2-2. Installation of MAIN PWB
WORKING DIAGRAM
A
(2)
A
(4)
(3)
(1)
tab
tab
tab
tab
C
B
dowel
Attach it from the
front plate side
(Fig.1)
< Only NX700E(QY-5015E-A) >
ANT-lead
ANT-lead
WORKING PROCESS
1. Attach processed Main PWB
on processed DVD mechanism.
processed
2. Fix it with IT screw(A).
Main PWB
< Only NX700E(QY-5015E-A) >
processed
DVD mechanism
3. Put ANT-lead of Main PWB
on the upper chassis.
The point is temporarily stopped
with the masking tape. (Fig.1)
4. Confirm that the direction of dashing out
of ANT-lead from Main PWB
and the silk print of PWB
are the same direction.
5. Insert FPC on the Main PWB side
in the socket of the DVD mechanism.
6. Check an insertion and a lock state
of FFC of socket(J401) of Main PWB.
ANT-lead
7. Attach side chassis R
on the right side of Main unit,
and fix it with machine screw(C).
No. PARTS CODE
A
Insert FPC
on the socket of
DVD mechanism.
B
C
- 23 -
WORKING POINT
Q'TY
* Fit at 4 tabs.
780-2604-50
4 * Follow screw sequence. (1 to 4)
312-0504-00
1 * Attach it from the front plate side
diagonally.
714-2604-8B
2 * Fit at 2 dowels
on front plate side,
on upper chassis.
< Only NX700E(QY-5015E-A) >
* Attach the side chassis R,
confirm ANT-lead doesn't crowd.
NX700/NX700E