Table of Contents
Advertisement
Wake on Active Source
The ViewBoard will detect HDMI signals in Standby mode. If HDMI has a signal
output, the ViewBoard will power on automatically.
Auto Search
When enabled, if the current source does not have a signal, the ViewBoard will
automatically search the input sources one time.
Channel Auto Switch
When enabled, if the ViewBoard detects a new signal input it will switch the input
source automatically.
o Signal Power Nff
Adjust the "No Signal" power off timer.
HDMI CTC Settings
Enable/disable HDMI CEC functions.
72 72
Advertisement
Table of Contents
