Table of Contents
Advertisement
Neneral Settings
To select an Input Source:
1.
Press INPUT on the remote control to display the General Setting menu, then
press
to enter the Input Source menu.
q
2.
Press
q/p/t/u
3.
Press ENTER on the remote control, or touch the input source.
4.
Press EPG/BACK on the remote control, or touch a blank area outside of the
menu to exit.
NOTE:
PC source will only display when the slot-in computer is connected.
To adjust the Backlight and enable/disable Flicker Free:
1.
Press INPUT on the remote control to display the General Setting menu.
2.
Drag the brightness slider directly to adjust the backlight value, and/or touch the
Flicker Free icon to enable/disable the function.
3.
Press EPG/BACK on the remote control, or touch a blank area outside of the
menu to exit.
to select the input source you want.
45 45
Advertisement
Table of Contents
