Table of Contents
Advertisement
Orbi Pro WiFi 6 AX5400 Router Model SXR50 and Orbi Pro WiFi 6 AX5400 Satellite Model SXS50
• WPA3 Enterprise: If your network is connected to a RADIUS server that can
provide authentication and your network includes WPA3 devices only, select this
radio button. WPA3 Enterprise can provide the highest level of security but WPA
and WPA2 devices cannot connect. Before a WiFi client can connect to the
network, the WiFi client must be configured on the RADIUS server and
authenticated against the RADIUS server. The router functions as the authenticator
between the WiFi client and the RADIUS server, which provides the actual
authentication.
When you select this option, additional fields display so that you can specify the
RADIUS server. Do the following:
a. In the IP address field, enter the IP address of the RADIUS server to which
the router must connect.
b. In the Port field, enter the port number that the router must use to
communicate with the RADIUS server.
By default, the port number is 1812.
c. In the Shared Secret field, enter the password that the router must use to
communicate with the RADIUS server.
This password must be configured on the RADIUS server. This password is
used to authenticate the router (not a WiFi client) against the RADIUS server.
6. Click the Apply button.
Your settings are saved.
Employee WiFi network
When employee devices connect to the employee WiFi network, they cannot see other
devices that are connected to the network and cannot access the local area network
(LAN).
The router web interface calls the employee WiFi network the Wireless 2 network.
Enable the employee WiFi network and manage the settings
Before you can set up the employee WiFi network, you must enable it. You must be
connected to the admin network to enable the employee WiFi network and change the
settings.
The router web interface calls the employee WiFi network the Wireless 2 network.
Manage the WiFi Networks
91
User Manual
Advertisement
Table of Contents
