Table of Contents
Advertisement
Orbi Pro WiFi 6 AX5400 Router Model SXR50 and Orbi Pro WiFi 6 AX5400 Satellite Model SXS50
Add satellites to your network using the router web interface
You can use the Orbi Pro WiFi 6 AX5400 router web interface to add a satellite to your
Orbi network.
To add a satellite to your Orbi network using the router web interface:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see What to do if you get a browser security warning on
page 29.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you set the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Add Orbi Pro Satellite.
The Place Your Satellite page displays.
5. Follow the instructions about where to place your satellite at your location.
6. Connect the satellite to a power source.
7. Click the NEXT button.
8. Wait about two minutes for the satellite's bar LED to light solid white.
9. Press the Sync button on the satellite.
The satellite's bar LED pulses white.
10. Click the SYNC button in the router web interface.
The router attempts to sync with the satellite.
The satellite's bar LED lights one of the following colors for about three minutes and
then turns off:
• Blue: The router and satellite successfully synced, and the connection between
the router and satellite is good.
• Amber: The router and satellite successfully synced, and the connection between
the router and satellite is fair. Consider moving the satellite closer to the router.
• Magenta: The router and satellite failed to sync. Move the satellite closer to the
router and try again.
Overview and Setup
19
User Manual
Advertisement
Table of Contents
