Table of Contents
Advertisement
The * button counts as one digit and enters a four second delay.
4.
Enter 12 on the Base Unit keypad. If desired, press pause on the Base
Unit to enter delays between numbers.
5.
Follow steps 3 and 4 in "Entering Base Unit Memory Numbers" on
page 30.
Entering Handset Tone/Pulse Memory Numbers
For example, to enter 555-1212 as a pulse number followed by 12 as a tone
number from the Handset:
1.
Follow steps 1 and 2 in "Entering Handset Memory Numbers" on
page 31.
2.
Enter 5551212 on the Handset keypad.
3.
Press the tone button on the Handset.
The tone button counts as one digit and enters a four second delay.
Enter 12 on the Handset. If desired,
4.
press ch/pause on the Handset to enter
delays between numbers.
5.
Follow steps 3 through 5 in "Entering Handset Memory Numbers" on
page 31.
Erasing a Stored Number
You can erase stored numbers from the Base Unit and the Handset memory.
Erasing Base Unit Memory Numbers
Press mem twice on the Base Unit.
1.
Enter the memory location number ( 0-9 ) you want to clear. You will
2.
hear a long beep confirming the number is erased.
Erasing Handset Memory Numbers
On the Handset press mem twice.
1.
The LCD displays:
2.
Enter the memory location number
(0-9) you want to clear. You will hear a
long beep confirming the number is
erased and the LCD displays:
32
Advertisement
Table of Contents
