Automatic Digital Code Security - Uniden EX965 User Manual

Automatic Digital Code Security

To avoid unauthorized calls on your phone, a Digital Code feature was
added to the EX 965 phone. This Digital Code is shared only between the
Handset and Base Unit. The Code is set automatically when you first use the
phone.
Please refer to the foldout in front of your operating guide for key
positions.
To change the Digital Code, be sure the Handset is on the Base, then:
1. Remove the Handset from the Base Unit.
Press the page/find button on the Base Unit.
2.
3. Place the Handset back on the Base
Unit while it's still beeping.
4. When the beeping stops, briefly remove the Handset again, and then
return it to the Base Unit.
5. The Status LED on the Base Unit will
blink to indicate that the Digital
Security Code is set to one of the more
than 65,000 codes.
If the Base Unit loses power while the Handset is off the Base, the
Digital Code may be erased. When this happens, the Handset will not
function.
28