Planet GSW-1820HP User Manual page 16

Step 5: After the brackets are attached to the 802.3at PoE+ Switch, use
suitable screws to securely attach the brackets to the rack, as shown
in Figure 5-2.
Figure 5-2: Mounting the 802.3at PoE+ Switch in a Rack
Step 6: Connect your 802.3at PoE+ Switch to 802.3af/802.3at complied PDs
and other network devices.
A. Connect one end of a standard network cable to the 10/100/1000BASE-T
RJ45 ports on the front panel of the 802.3at PoE+ Switch.
B. Connect the other end of the cable to the network devices such as
printer servers, workstations or routers, etc.
Step 7: Supply power to the 802.3at PoE+ Switch.
A. Connect one end of the power cable to the 802.3at PoE+ Switch.
B. Connect the power plug of the power cable to a standard wall outlet.
When the 802.3at PoE+ Switch receives power, the power LED should remain
solid Green.
16