Uniden BCT-12 Operating Manual page 9

Windshield Mounting
1. Find a good position for the BCT-12 on your windshield. Refer
to the Helpful Tips on page 5 for some guidelines on mounting
positions.
2. Put the metal
mounting
bracket with
the suction
cups on the
windshield to
adjust it for
best position.
3. If necessary, adjust the metal
mounting bracket so that
when you slide the BCT-12
onto it, it is parallel to the
road surface and fits flush
against the windshield. Your
BCT-12 should look like one
of the examples at the right
once it is installed.
Caution: Do Not adjust the metal mounting bracket with the
BCT-12 attached. Doing so can cause damage to the
bracket and the unit.
1
3 4
Installation
1. Windshield
2. Road Surface
3. Metal Mounting
Bracket
4. Metal Mounting
Bracket parallel
2
to road
VOLUME
OFF
VOLUME
OFF
VOLUME
OFF
9