Uniden BCT-12 Operating Manual page 21

Scanning Local Police Frequencies
This mode scans only the local police and county sheriff
frequencies. Mobile extenders and other enforcement channels of
the Highway Patrol are priority checked for alarm activity.
Note: The priority check can be turned off by pressing and
holding the Alert key for two seconds.
1. To scan local police
frequencies, press the
key repeatedly until LP is
blinking in the LED display.
2. The LP LED will light up.
3. While scanning, the BCT-12
displays the state code for
the state you selected. When
the BCT-12 detects an active
frequency, it displays LP in
the LED display. The BCT-12
will stop for two seconds, and
then resume scanning with
the state code displayed in
the LED display.
Scanning All Police Frequencies
This mode scans standard State Police/Highway Patrol
frequencies as well as local police and county sheriff frequencies.
Mobile extenders and other enforcement channels of the Highway
Patrol are priority checked for alarm activity.
Note: The priority check can be turned off by pressing and
holding the Alert key for 1.5 seconds.
M
Operating Instructions
MUTE ALT
LP
W/A
HOLD
MUTE ALT
LP
W/A
HOLD
MUTE ALT HP
tx
W/A LP
HOLD
MUTE ALT HP
lp
W/A LP
HOLD
HP
LP
HP
LP
21