Uniden BCT-12 Operating Manual page 22

Operating Instructions
1. To scan highway patrol and
local police frequencies,
M
press the
until HL is blinking on the
LED display.
2. The LP and HP LED's will
light up.
3. While scanning, the BCT-12
displays the state code for
the state you selected. When
the BCT-12 detects an active
frequency, it displays either
LP for local police or HP for
highway patrol in the LED
display. The BCT-12 will stop
for two seconds, and then
resume scanning with the
state code displayed in the
LED display.
Scanning News Media Frequencies
This mode scans radio conversations from traffic reporters, news
reporters, and photographers as they report the slowdowns and
tie-ups on area roads and chase down the news stories of the day.
The news mode also scans the GMRS (General Mobile Radio
Service) frequencies for "Notification Net" radio traffic.
Note: Priority Alert does not work in this mode.
1. To scan news media
frequencies, press the
key repeatedly until NW is
blinking in the LED display.
22
key repeatedly
M
MUTE ALT
HL
W/A
HOLD
MUTE ALT
HL
W/A
HOLD
MUTE ALT
TX
W/A
HOLD
MUTE ALT
LP
W/A
HOLD
MUTE ALT
HP
W/A
HOLD
MUTE ALT
NW
W/A
HOLD
HP
LP
HP
LP
HP
LP
HP
LP
HP
LP
HP
LP