Canon PC300 Service Manual page 95

9) Remove the screw (M4x8; yellow) ©,
and disengage the hook @; then, detach
the DC controller/DC power supply PCB
O.
ON,
t—
a
Figure 4-704
When attaching the DC controller/DC
power supply PCB, make sure that
lead wires. are not bitten or shorted, or
the connectors are not disconnected.
COPYRIGHT © 1994 CANON INC.
CANON PC300/320/925, FC210/230 REVO JULY 1994 PRINTED IN JAPAN (MPRIME AU JAPON)
@ MECHANICAL SYSTE!
2. Points to Note When Installing the
Delivery Door Switch
When inserting the fastons into the
door switch, make sure that the correct
fastons: are connected as identified by
color (Figure 4-705).
Fastons
(black harness)
Figure 4-705
4-17