Canon PC300 Service Manual page 93

*¢ MECHANICAL SYSTEM 8:
3) Remove-the two screws @, and remove 6) Disconnect the connector @, and
the heat exhaust fan @. remove the fixing upper unit @.
Figure 4-609
\
: 4, Detaching the Pressure Roller
Figure 4-607 1) Detach the fixing upper unit; see p. 4-14.
4) Disengage the hook ©, and detach the Note:
holder ©. Take care not to damage the pressure
5) Remove the two screws @, and turn the roller by the separation claw or inlet
upper stay © in the direction of the guide when detaching it.
arrow to remove.
2) Detach the pressure roller © as if to lift
it.
Figure 4-608 Figure 4-610
COPYRIGHT © 1994 CANON INC, CANON PC300/320/925, FC21020 REV.O JULY 1904 PRINTED IN JAPAN (IMPRIME AU JAPON) 4-15