Canon PC300 Service Manual page 91

ECHANICAL SYSTEM 2
WL FOUN G SYSTEM 2. Detaching the Fixing Assembly
1) Detach the body cover; see p. 4-1.
2) Disconnect the three connectors ©.
A. Fixing Assembly
1. Construction
Oo @®@
@ Fixing heater @ Pressure roller
® Fixing film (lower roller) Figure 4-602
Inlet guide
@ 9 3) While lifting the hook @, slide the deliv-
Figure 4-601 ery door switch @ to the front to remove.
Note:
aN 1... The fixing film is made of special
aay material; do not touch it or leave dust
= : onit.
2. The pressure exerted by the lower
roller is controlled by the pressure
spring built into' the bushing.
3. The copier does not have an adjust-
ment mechanism for roller pressure.
Figure 4-603
COPYRIGHT © 1994 CANON INC. CANON PC300920/325, FC210/230 REV.0 JULY 1094 PRINTED IN JAPAN (MPRIME AU JAPON) 4-13