Table of Contents
Advertisement
A. SHOCK
Anti-shock works by reading audio data and storing it in
memory (up to 10 seconds worth). The unit then fills in
interruptions caused by bumps and vibrations with data
from the memory. This unit also incorporates a powerful
anti-shock mechanism that prevents skipping caused
when play speed is changed by swinging of the unit.
Press [A.SHOCK] during play or stop
mode.
The indicator appears on the display panel. H
When bumps continue repeatedly
The indicator appears on the display and sound is inter¬
rupted. 03
To cancel anti-shock function
Press [A.SHOCK] again.
Listening to sound with the unit connected to
an audio system
The anti-shock function incorporates digital signal com¬
pression technology. It is recommended that the anti-
shock function be canceled if the unit is connected to a
home audio system.
Remote control
;s-i-
Optical digital out Jack cannot be used when the
anti-shock function is on.
•The [A.SHOCK] setting can be changed during play,
but this may cause a slight interruption in the sound be¬
cause the disc's rotation speed changes.
• During the anti-shock operation, the disc rotates at a
higher rate than usual in collecting extra audio data.
This could result in a slight increase in disc rotation
noise.
Advertisement
Table of Contents
