Panasonic SL-SX410 Operating Instructions Manual page 22

Wmm
I
Resume play E
This function allows you to listen from the beginning of
the track where play stopped because the unit was pow¬
ered off (or switched to stop status). It is useful when lis¬
tening to CDs in the car, etc.
To cancel the resume mode
Set play mode selector to [NORMAL],
For your reference:
• If the [RESUME, NORMAL, RANDOM] (play mode) se¬
lector is put in the [RESUME] position, the all-repeat
function will be activated automatically as soon as the
unit is powered on.
• If power is cut off near the end of a track (power off
status), playback may resume from the beginning of the
next track in some cases.
• If the unit is powered off while a disc was playing and
then a new disc is inserted, play will begin from the mid¬
dle of the new disc because the unit remembers the po¬
sition where play stopped on the previous disc.
Changing the sound quality E
Press [EQ] while disc is playing or when
unit is in stop status.
The setting is switched in the sequence indicated below
each time [EQ] is pressed.
S-XBS <-
1
TRAIN
I
Cancel-
S-XBS:
Select this setting to boost the low-range response.
TRAIN:
Select this setting to avoid annoying other passen¬
gers with noise from your earphones while riding on
the train, or to reduce fatigue when listening for a
long period of time.
HflEl
The sound quality setting does not affect the output from
the [OPT OUT] (optical digital output) jack.
Remote control
1 Set the switch to [SUB].
2 Press [+, EQ] while disc is playing or when unit
is in stop status.
The setting is switched in the sequence indicated be¬
low each time [+, EQ] is pressed.
® S-XBS <—
l
® TRAIN
l
Cancel-