Location Of Controls; Anti-Skip System - Panasonic SL-CT485 Operating Instructions Manual

ip fet [eet
Other Play Methods —
atl bardisses
The letters such as @ in the various illustrations refer to the descriptions in the "Location of Controls" section.
Skip play
The disc plays from the specified track through to the
end, then play stops automatically
Preparation Put unt in stop mode
1 Select the desired track.
Program play
Up to 24 tracks can be entered in the programmed se-
quence
Preparation Put unit in stop mode
1 Select the desired track
2 Register in sequence
(The indication 'M" and the programmed se-
quence appear on the display )
MEMORY/RECALL
©
3 Repeat steps 1 and 2 to program all
the desired tracks 0 Q
5 To program the same track ın the se-
quence more than once
After step 2, press [MEMORY/RECALL} the desired
number of times
If " £" 1s displayed
No more tracks can be programmed
Location of Controls
E To confirm the contents of the program
Press [MEMORY/RECALL] while the disc is playing
{The number of the programmed tracks appear on
the display In sequence )
E To delete the entire programmed se-
quence
Press [G,OPR OFF]
|Note}
The repeat and random play modes are canceled after
steps t and 2
Repeat play/Random play
Press during play or stop mode
MODE
LE]
The setting is switched in the sequence indicated below
each time [MODE] ts pressed
1-track repeat (1 œ)
One track 1s repeated
All-track repeat { 5 }
All the tracks on the disc are repeated
Random (RANDOM)
The tracks play once each in random
order and then play stops
Random repeat (RANDOM, >)
The tracks play repeatedly in random
order
Cancel {no indicator is shown)
When pressed during program play
The setting is switched In the sequence Indicated below
each time [MODE] ıs pressed
1-track repeat (1 CO M)
One track ıs repeated
Memory repeat (> M)
The programmed tracks are repeated
Cancel (M)
eYou can select the first track to play in random play
and random repeat play by pressing [Pi] while the
disc ts stopped All the tracks are played
©You cannot select random play or random repeat play
during program play
The mode ıs canceled when you disconnect the power
source
Changing the sound quality
Press during play or stop mode
EQ
(Beep)
The setting switches in the sequence indicated below
each time [EQ] ıs pressed
$-XBS—TRAIN—Cancel (no indicator is shown)
ee
$-XBS
Select this setting to boost the low range response
TRAIN
Select this setting to avoid annaying other passengers
with noise from your headphones/earphones while rid-
Ing on the train, or to reduce fatigue when listening for a
long period of time
The setting returns to S-XBS when you disconnect the
power source
Anti-Skip System
This system deals with skipping in a variety
of ways
@The thinner and lighter construction makes the unit
less susceptible to vibration
eAn anti-skip mechanism prevents skipping caused
when play speed changes due to swinging of the unit
A recovery system immediately returns the laser pick-
up to its original position if it is knocked off the track by
a strong shock
oThe 40-second anti skip memory fills in interruptions
caused by bumps and vibrations
The anti-skip system works automatically while the
system is on and cannot be canceted
When bumps continue repeatedly
The message 'SORRY" appears on the display and
sound ıs interrupted
te;
The anti-skip memory compresses digital signals
'SU-CT485!
Portable CD player F) Wired remote control
'SL-CT485 |
@ Headphone volume control — 4 3 5 G
pane buttons (—, VOLUME,+) © Skip/search buttons
© Memory/recall button (+4, >>I)
(MEMORY/RECALL) © Play/stop/operation off button
© Display (E/P)
© EQ button (EQ) @ Volume control buttons
@ Mode button (MODE) (-—,VOL,+)
Q Play/pause button (> #1) © Earphone jack
© Open switch (OPENP) @ Clip
(Œ, OPR OFF)
© Skip/search buttons
(Hid, pe 4a, pb)
@ Stop/operation off button
@ Hold switch (HOLD)
© EQ button (EQ)
@ Plug
@ DC IN jack (DC IN 45 V 9-<- }
@ Hold switch (HOLD)
© Headphone jack (Q)
@ CD release button (PUSH)
@ Hole for car mounting base
© Battery lid lock (LOCK)