MSI MS-S3361 User Manual
MSI MS-S3361 User Manual

MSI MS-S3361 User Manual

Server motherboard

Advertisement

Quick Links

D3051
MS-S3361
Server Motherboard
User Guide

Advertisement

Table of Contents
loading

Summary of Contents for MSI MS-S3361

  • Page 1 D3051 MS-S3361 Server Motherboard User Guide...
  • Page 2: Table Of Contents

    Contents Regulatory Notices ....................... 4 Safety Information ......................6 Specifications ........................ 7 Overview of Components ..................... 9 Rear I/O Panel ......................10 UID LED Button ..................... 10 COM Port ....................... 10 VGA Port ........................ 10 USB 3.2 Gen 1 Port (USB 3.2 Gen 1/ USB 2.0) ............10 GbE RJ45 Port (for mgmt.) ...................
  • Page 3 Connectors ........................20 Power Connectors ....................20 SATAPWR1: SATA Power Connector ............20 JPWR1: 12V Power Connector ..............20 JPWR2: Main Power Connector ..............21 JSDOMPWR1: SATA DOM Power Connector ..........21 Cooling Connectors ....................22 FAN1~8, PUMP1: Fan Power Connectors ............. 22 Other Connectors ....................
  • Page 4: Regulatory Notices

    Chemical Substances Information In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at: https://csr.msi.com/global/index CE Conformity Hereby, Micro-Star International CO., LTD declares that this device is in compliance with the essential safety requirements and other relevant provisions set out in the European Directive.
  • Page 5 Copyright and Trademarks Notice Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied.
  • Page 6: Safety Information

    Safety Information ∙ Always read the safety instructions carefully. ∙ Keep this User’s Manual for future reference. ∙ Keep this equipment away from humidity. ∙ Lay this equipment on a reliable flat surface before setting it up. ∙ The openings on the enclosure are for air convection hence protects the equipment from overheating.
  • Page 7: Specifications

    Specifications Model MS-S3361 Form factor Micro-ATX Dimensions 243.84mm (9.6”) x 243.84mm (9.6”) Processor ∙ 1 x AMD® Ryzen™ 7000 series Processors, TDP 170W - Processor socket AM5 Memory ∙ 4 x DDR5 memory slots, supporting up to 128GB - Supports UDIMM 5200MT/s (2DPC), ECC/ non-ECC Networking ∙...
  • Page 8 Model MS-S3361 Rear I/O ∙ 4 x USB 3.2 Gen 1 Type-A ports (USB 3.2 Gen 1/ USB 2.0) ∙ 2 x 1GbE RJ45 ports ∙ 2 x 10 GbE RJ45 ports ∙ 1 x GbE RJ45 ports (Mgmt.) ∙ 1 x COM port ∙...
  • Page 9: Overview Of Components

    Overview of Components BAT1 Overview of Components...
  • Page 10: Rear I/O Panel

    Rear I/O Panel GbE RJ45 Port COM Port (for mgmt.) 10 GbE RJ45 Port UID LED Button VGA Port GbE RJ45 Port USB 3.2 Gen 1 Port (USB 3.2 Gen 1/ 2.0) UID LED Button The UID (Unit Identification) button help users identify and locate a system, especially in high-density rack environments.
  • Page 11: Gbe Rj45 Port (For Mgmt.)

    GbE RJ45 Port (for mgmt.) Connect a specially configured RJ45 console cable to this jack for network routers/ switches to communicate with the system through a serial connection. Link/ Activity LED Speed LED Status Description Status Description No link Linked Orange 100M Green Data activity...
  • Page 12 Component Contents Component Page CPU Socket Memory DIMMA1~2, DIMMB1~2: DDR5 DIMM Slots Storage SATA3_1, SATA1~4: SATA 3.0 6Gb/s Ports M2_1~2: M.2 Slots (M Key, PCIe 4.0, 22110/ 2280) Expansion Slots PCIE_1~2: PCIe Expansion Slots Connectors Power Connectors SATAPWR1: SATA Power Connector JPWR1: 12V Power Connector JPWR2: Main Power Connector JSDOMPWR1: SATA DOM Power Connector...
  • Page 13: Cpu Socket

    CPU Socket Introduction to the AM5 CPU The surface of the AM5 CPU has two notches and a golden triangle to assist in correctly lining up the CPU for motherboard placement. The golden triangle is the Pin 1 indicator. ⚠ Important Overheating will seriously damage the CPU and system.
  • Page 14: Cpu & Heatsink Installation

    CPU & Heatsink Installation Use appropriate ground straps, gloves and ESD mats to protect yourself from electrostatic discharge (ESD) while installing the processor. ⚠ Important Images are for illustration purposes only; actual parts may vary. CPU Socket...
  • Page 15: Memory

    Memory DIMMA1~2, DIMMB1~2: DDR5 DIMM Slots DIMMA1 DIMMB1 Channel A Channel B DIMMA2 DIMMB2 Recommended Memory Population Quantity of DIMMs DIMMA1 Channel A DIMMA2 DIMMB1 Channel B DIMMB2 **“V” indicates a populated DIMM slot. ** ⚠ Important Only support UDIMM. ∙...
  • Page 16: Installing Memory Modules

    Installing Memory Modules 1. Open the side clips to unlock the DIMM slot. 2. Insert the DIMM vertically into the slot, ensuring that the off-center notch at the bottom aligns with the slot. 3. Push the DIMM firmly into the slot until it clicks and the side clips automatically close.
  • Page 17: Storage

    Storage SATA3_1, SATA1~4: SATA 3.0 6Gb/s Ports These connectors are SATA 6Gb/s interface ports, it can connect to SATA devices. SATA4 SATA3 SATA2 SATA1 SATA3_1 ⚠ Important ∙ Please do not fold the SATA cable at a 90-degree angle. Data loss may result during transmission otherwise.
  • Page 18: M2_1~2: M.2 Slots (M Key, Pcie 4.0, 22110/ 2280)

    M2_1~2: M.2 Slots (M Key, PCIe 4.0, 22110/ 2280) Please install the M.2 solid-state drive (SSD) into the M.2 slot as shown below. ⚽ Video Demonstration Watch the video to learn how to Install M.2 SSD. *M2_1: The M2_1 and PCIE_2 slots cannot operate simultaneously.
  • Page 19: Expansion Slots

    Expansion Slots PCIE_2*: PCIe 4.0 x 8 slot (Gen 4 x 4 signal from CPU) PCIE_1: PCIe 5.0 x 16 slot (Gen 5 x 16 signal from CPU) *PCIE_2: The PCIE_2 and M2_1 slots cannot operate simultaneously. You can use the JSEL_M1 jumper to select which one to enable.
  • Page 20: Connectors

    Connectors Power Connectors JPWR1 JPWR2 JSDOMPWR1 SATAPWR1 SATAPWR1: SATA Power Connector This connector is used to provide power to SATA devices. SATAPWR1 P12V JPWR1: 12V Power Connector This connector allows you to connect an ATX power supply. JPWR1 P12V P12V P12V P12V Connectors...
  • Page 21: Jpwr2: Main Power Connector

    JPWR2: Main Power Connector This connector allows you to connect an ATX power supply. +3.3V +3.3V PWR OK 5VSB +12V +12V +3.3V JPWR2 +3.3V -12V PS-ON# JSDOMPWR1: SATA DOM Power Connector This connector is used to provide power to SATA DOM devices. JSDOMPWR1 ⚠...
  • Page 22: Cooling Connectors

    Cooling Connectors FAN1~8, PUMP1: Fan Power Connectors The fan power connector supports system cooling fans with +12V. When connecting the wire to the connectors, always note that the red wire is the positive and should be connected to the +12V; the black wire is Ground and should be connected to GND. FAN_TACH FAN1~8 P12V...
  • Page 23: Other Connectors

    Other Connectors JFP1: Front Panel Connector The front panel connector is provided for electrical connection to the front panel switches and LEDs. PWR_LED+ FP_PWR SYS_ID_LED+ PWR_LED- SYS_ID_LED- HDD_ACT_LED+ SYS_FAULT_LED1- HDD_ACT_LED- SYS_FAULT_LED2- PWR_BTN NIC#1_ACT_LED+ JFP1 PWR_BTN_GND NIC#1_ACT_LED- RST_BTN SMB_SDA RST_BTN_GND SMB_SCL SYS_ID_BTN CHASSIS_INTRUSION WIRE_TEMP_SENSOR...
  • Page 24: Jtpm1: Spi Tpm Module Box Header

    JTPM1: SPI TPM Module Box Header This connector connects to a TPM (Trusted Platform Module) (optional). Please refer to the TPM security platform manual for more details. SPI_LOC_ROM_CS_N CPU_RSMEST_L PVDD_P1V8_AUX SPI_LOC_ROM_CLK SPI_CPU0_WP_L JTPM1 SPI_CPU0_HOLD_L SPI_LOC_ROM_MISO SPI_LOC_ROM_MOSI CPU_SPI_TPM_CS_N PVDD_P1V8_AUX CPU_TPM_SPI_IRQ_N PVDD_P1V8_AUX TPM_RESET_N PVDD_P1V8_AUX JTPM1...
  • Page 25: Jgpio1: Gpio Header

    JGPIO1: GPIO Header This connector is provided for the General-Purpose Input/Output (GPIO) peripheral module. USER_GPIO0 USER_GPIO1 USER_GPIO2 USER_GPIO3 JGPIO1 USER_GPIO4 USER_GPIO5 USER_GPIO6 USER_GPIO7 No pin JPMBUS1: PMBUS Box Header Power Management Bus (PMBus) is a variant of the System Management Bus (SMBus) which is targeted at digital management of power supplies.
  • Page 26: Jchassis: Chassis Intrusion Header

    JCHASSIS: Chassis Intrusion Header This connector connects to the chassis intrusion switch cable. If the chassis is opened, the chassis intrusion mechanism will be activated. The system will record this status and show a warning message on the screen. To clear the warning, you must enter the BIOS utility and clear the record.
  • Page 27: Jusb1: Usb 3.2 Port Box Header

    JUSB1: USB 3.2 Port Box Header This port is backward-compatible with USB 2.0 devices and supports data transfer rate up to 5 Gbit/s (SuperSpeed). USB_VCC1 USB3_ESD_RX4N USB3_ESD_RX4P USB3_ESD_TX4N USB3_ESD_RX4P USB3_ESD_DN8 USB3_ESD_DP8 JUSB1 USB2_ESD_DP9 USB2_ESD_DN9 USB3_ESD_TX5P USB3_ESD_TX5N USB3_ESD_RX5P USB3_ESD_RX5N USB_VCC2 No Pin JUSB2: USB 2.0 Type-A Connector JUSB2 The USB (Universal Serial Bus) port is for attaching USB devices such...
  • Page 28: Fp_I2C_1, Rbp_I2C_1~2: I2C Box Headers

    FP_I2C_1, RBP_I2C_1~2: I2C Box Headers I2C connectors are used to connect to the System Management Bus (SMBus). FBP_I2C_1 is for front HDD backplane, and RBP_I2C_1, RBP_I2C_2 are for rear HDD backplanes. I2C_CLK FP_I2C_1 RBP_I2C_1 RBP_I2C_2 I2C_DAT JCOM1: COM Port Box Header This connector is a 16550A high speed communications port that sends/receives 16 bytes FIFOs.
  • Page 29: Jumpers

    Jumpers ⚠ Important Avoid adjusting jumpers when the system is on; it will damage the motherboard. JSEL_M1 JSEL_BMC1 Jumper Name Default Setting Description 1-2: M.2_1 enabled, PCIE_2 disabled (Default) JSEL_M1 2-3: PCIE_2 enabled, M.2_1 disabled 1-2: Using CPU (Default) JSEL_BMC1 2-3: Using BMC Jumpers...
  • Page 30: Onboard Leds

    Onboard LEDs BMC_LED1: BMC Heartbeat LED This LED indicates the BMC (Baseboard Management Controller) status. Status Description BMC is not activated BMC is functioning normally Blinking LED_H1, LED_L1: Port 80 Debug LEDs The Port 80 Debug LEDs display progress and error codes during and after POST (Power-On Self Test).
  • Page 31 EPS.MSI.COM MSI.COM...

This manual is also suitable for:

D3051

Table of Contents