Table of Contents
Advertisement
B. Initiating VistaScan directly
1.
Launch the VistaScan program group.
2.
The VistaScan interface will appear as shown in the next page.
3.
From the "Scan to" panel in the main menu, choose a destination for the
scanned image.
4.
Click one of the small icons in the "Scan To" panel representing the
desired destination (a file, printer, email application, etc.) for the
scanned image. For example, if you want to save the image in a
particular file, click the small icon
click the "Preferences" button
interface. The Preferences dialog box will appear.
5.
In the Preferences dialog box, enter the relevant details into the "File
Name", "File Format" and "File Folder" fields respectively. You may use
the "Browse" button to help you locate the desired folder for your
image.
6.
Click "OK". The entries you made will be implemented and the dialog
box exited.
7.
From the four modes on the "Click to Scan" panel, click a scan mode
button that best suits the required scan. For example, if you wish to
scan a color photograph, click the Color Photo button in order for the
image to be scanned in true color. Scanning will commence upon
selection of a button.
8.
For an explanation of the other "Scan to" destinations, please refer to
VistaScan's on-line help.
on the middle of panel, and then
on the top right of the VistaScan
9
Advertisement
Table of Contents
