The Radio.26; Sequential Tuning.26 - Technics SA-DX940 Operating Instructions Manual

The radio
Sequential tuning
Use the tuning buttons to tune-in radio stations.
1 Turn [INPUT SELECTOR] to select
"TUNER".
2 Press [BAND] to select "FM" or "AM".
3 Press [TUNING ( v or
A
)] to tune to
the desired frequency.
Tuning interval FM: 0.2 MHz
AM: 10 kHz
"TUNED" lights up when tuned.
"STEREO" lights up when an FM stereo broadcast is
received.
To make an automatic search for stations
It (TUNING (V or A)] is held down tor an instant until the
frequency begins to scroll, the broadcast stations are tuned
in automatically when one is found.
IflHEl
Tuning may stop automatically if any jamming is
encountered.
If noise is excessive in the FM stereo mode
Press [FM MODE].
("STEREO" will go out, and "MONO" will light up).
The broadcast will be monaural, but noise will be reduced.
If the button is pressed once more, the stereo mode resumes.
If there is hissing or thumping while the radio is
playing
Press and hold [-DSP ON/DEFEAT] to select "DEFEAT".
(-► Page 21 for details about DSP DEFEAT.)
For your reference
The tuner can pick up interference from DVD players. If this
occurs turn the DVD player off.
RQT53O0