Reversing the Door
(1115R & 1115WC Black Units Only).
Black Model 1115R
To reverse the door, perform the following:
1. Remove the grille and grille cap (two screws).
Figure 4
2. Remove top hinge from cabinet (three screws) (Figure
4). Hold door to keep it from falling.
3. Lift the door off the bottom hinge.
Figure 5
4. Remove bottom hinge from cabinet (two screws)
(Figure 5).
www.U-LineService.com
1115R and 1115WC Models
ULIN_0143_A
ULIN_0121 _A
6
Figure 6
5. Remove screws on opposite side of cabinet (Figure 6).
Note that there may be a nut behind one or both
screws on either side.
Figure 7
6. Install hinge on opposite side, bottom of cabinet
(Figure 7). Replace nut on back side where installed.
Align hinge outer edge with cabinet before tightening
screws.
1
Figure 8
ULIN_0122 _A
ULIN_0123 _A
ULIN_0109_A
07/2006