When Using - Panasonic NE-7920 Service Manual

4. All foods for Auto Sensor Cooking on DEFROST-
COOK or DEFROST-COOK-WARM should be
solidly frozen.
5. Before using Auto Sensor feature, make sure glass
tray in the oven is dry to assure best Auto cooking
results.
6. Room temperature or heat surrounding the oven
should not be above 95 degrees F when using the
Auto Sensor Cooking cycle. Inaccurate cooking may
result.
7. Foods less than 3 or 4 ounces should be cooked by
power and time, not by the Auto Sensor Cooking
program.
AUTOMATIC CHECKING MECHANISM
and Power cooking.
*When more than two Auto Sensor Programs are
selected
at a time by using different Auto
Cook
functions.
(When same
Auto Cook function
is
selected two or three times, A1-A6 only appear in
the Display Window.)
*When 4th stage cooking is selected.
3.
When the oven is not being used for cooking the
Display Window will show TOD. If the oven is
affected by temporary power failure or the plug is
removed and reinserted, the Display Window will
show zeros (00:00) with blinking colon automatically.
To reset the correct TOD, simply follow the clock
set instructions.
OQ Q [on] OQ OQ
M.High Med M.Low Low Warm
Fig. 4
ae
CF OFF
fas) Oo fas) jam) jos) oO
High M.High Med M Low Low Warm
Fig. 5
CAUTION WHEN USING
1. Do not use metalware
In rare cases where you must use meta! materials such
as foil or skewers, etc., take care not to have the edge
of the metal material touch the inner glass screen, or
the
oven walls
(coated
steel), because
the glass
plate may
be broken
or the coated
part may
be
burned by sparking.
of the oven.
Keep the inside of the oven clean.
period of time.
around the door just wipe it off. There is no need
© MNO
A10
10.
11.
12.
for concern and this never causes any microwave
leakage.
Cautions when operating the control panel.
A. Do not touch control pads with water or oil on
your finger.
When the control panel is dirty, wipe with a
damp cloth first and then finish with a soft dry
cloth. Do not use harsh detergents or abrasives.
B. Do not try to touch the pads while wearing
gloves or while holding any insulating materials.
C. For most accurate programming of the unit,
tap the center of each pad firmly.
D. Do not hit or strike the control panel since this
is made of glass and may be broken.
When power select is set at a setting other than High,
the intensity of the oven light will vary. This is
normal and indicates that the oven is operating
normally.
Do not put your watch directly on the turntable.
Mechanics of the turntable utilize magnetic capsules
and might damage your watch.