Connecting A Device To A Wlan Home Network (Wifi) Without Wps Function; Connect Me Connect App - Bosch WAL28PH7NL User Manual And Installation Instructions

Table of Contents

Advertisement

NL Home Connect
Reconnect the device to the Wi-
s
Fi network with WPS function.
Connect the appliance to the
5.
Home Connect app. → Page 38
16.2 Connecting a device to a
WLAN home network
(WiFi) without WPS
function
If your router does not have WPS
function, you can manually connect the
device to your home network (Wi-Fi).
Requirements
s Wifi on the router is activated.
s The basic WiFi setting on the device
rate is activated.
→ "Activate WiFi on the device",
Page 39
s The appliance has
cation reception from the home
network (Wi-Fi).
s The Home Connect app is on the
mobile terminal installed.
Press for at least 3 seconds
1.
know.
a The display shows auto reflected
to give.
Set the program to position 2.
2.
a The display shows JUICE reflected
to give.
.
Press
3.
a flashes in the display
a The device creates its own WiFi
home network with the network
name (SSID) HomeConnect on.
Call up the WiFi settings on the
4.
mobile end device.
38
Connect the mobile end device to
the HomeConnect WiFi network
and enter the HomeConnect WiFi
password (key).
a Your mobile end device makes
connection to the device. The
connection procedure can take up
to 60 seconds.
Open the Home Connect app on
5.
the mobile end device and follow
the steps in the app.
Enter the network name (SSID) and
6.
password (key) of your home
network in the Home Connect app.
Follow the steps in the Home
7.
Connect app to connect the
appliance.
a When on the display con is becoming
displayed and permanent
lights up, the device is connected
to the home WiFi network.
If the display shows Home Connect
8.
Error, the appliance is not connected
to the home WiFi network.
s
s
Connecting the appliance to the
9.
Home Connect app → Page 38.
16.3 Connecting the device to
.
Requirements
s The device is connected to the
WiFi home network.
s The Home Connect app is open
and you have signed up.
Check if the device is within
range of the Wi-Fi network.
Reconnect the device to the Wi-
Fi network with WPS function.
the Home Connect app

Advertisement

Table of Contents
loading

Table of Contents