Table of Contents
Advertisement
en Home Connect
"Connect your appliance to the
5.
Home Connect app." → Page 45
Connecting the appliance to a
WLAN home network (Wi-Fi)
without WPS function
If your router does not have a WPS
function, you can connect the appli-
ance to your WLAN home network
(Wi-Fi) manually. The appliance
quickly sets up its own Wi-Fi network.
You can connect a mobile device to
the WLAN network and transfer the
network information for the WLAN
home network (Wi-Fi) to your appli-
ance.
Requirement: The Home Connect
app is open and you have logged on.
Press and hold Remote Start
1.
at least 3 seconds.
a The display shows Aut.
Set the programme to position 2.
2.
a The display shows SAP.
Press Start / Reload
3.
flashes in the display.
a
a The appliance now sets up its own
Wi-Fi network with the name (SSID)
HomeConnect.
Call up the Wi-Fi settings on the
4.
mobile device.
44
a Your mobile device now connects
5.
for
6.
.
7.
a If the display shows and
8.
9.
Connect the mobile device to the
Home Connect Wi-Fi network and
enter the password (key) Home-
Connect.
to the appliance. The connection
process may take up to
60 seconds.
Open the Home Connect app on
your mobile device and carry out
the steps in the app.
In the Home Connect app, enter
the network name (SSID) and
password (key) for your home net-
work.
Carry out the steps in the
Home Connect app to connect the
appliance.
up permanently, the appliance is
connected to the home network.
If the display shows Err, the appli-
ance is not connected to the home
network.
Check whether your appliance is
‒
in range of your home network.
Reconnect the appliance to the
‒
WLAN home network (Wi-Fi)
with WPS function.
"Connect your appliance to the
Home Connect app" → Page 45.
lights
Advertisement
Table of Contents
