Table of Contents
Advertisement
NL Home Connect
Reconnect the device to WLAN
-
home network (WiFi) with WPS
function.
Connect the appliance to the
5.
Home Connect app. → Page 47
16.2 Connecting a device to a
WLAN home network
(WiFi) without WPS
function
If your router does not have a WPS
function, you can manually connect
the device to your WLAN (WiFi) home
network. The device briefly sets up its
own WiFi network. You can connect to
the WiFi network with a mobile end
device and transfer the network
information of the WLAN home
network (WiFi) to your device.
Required: The Home Connect app is
open and you have logged in.
At least 3 s on Control via App
1.
press.
a The display shows auto reflected
to give.
Set program to level 2.
2.
a The display shows JUICE reflected
to give.
Press Start/Refill
3.
a flashes in the display
a The device will now create its own
WiFi network with the network name
(SSID) HomeConnect.
46
Call up WiFi settings in the mobile
4.
end device.
Connect the mobile end device to
the HomeConnect WiFi network
and enter the WiFi password (Key)
HomeConnect.
a Your mobile end device connects
themselves with the device. The
connection procedure can take up
to 60 seconds.
.
.
Open the Home Connect app on the
5.
mobile end device and follow the
steps in the app.
Enter the network name (SSID)
6.
and password (Key) of your home
network in the Home Connect
app.
Follow the steps in the Home
7.
Connect app to connect the
appliance.
aWhen the display shows
displayed and permanent
lights up, the device is
connected to the home network.
Advertisement
Table of Contents
