Table of Contents
Advertisement
NL Troubleshooting
Malfunction
High spin speed
rental is not
reached.
Program centrifugal
run does not start.
fizzing, hissing
loud.
long, humming
loudly before the start
of the washing or
softening cycle.
Short buzzing sound
after switching on
of the device.
Loud noise during
spinning.
52
Cause and Troubleshooting
Low spin speed is set.
For the next wash, set a higher spin
▶
speed in.
is activated.
Select a suitable program for the type of fabric.
▶
Unbalance control system compensates for
imbalance through reduced spin speed.
Redistribute the laundry in the drum.
▶
Remark: If possible, place large and small items of
laundry together in the drum. Laundry of different
sizes is more evenly distributed when spinning.
Start the program Centrifuge .
▶
Drain pipe or water drain hose is clogged.
Clean the drain pipe and the water drain hose.
▶
Drain pipe or water drain hose is kinked or
pinched.
Make sure that the drain pipe and water drain
▶
feed hose is not kinked or pinched.
The unbalance detection system has aborted the spin
due to uneven distribution of the laundry.
Redistribute the laundry in the drum.
▶
Remark: If possible, place large and small items of
laundry together in the drum. Laundry of different
sizes is more evenly distributed when spinning.
Start the program Centrifuge .
▶
Water is flushed into the detergent drawer under
pressure.
No error - normal operating noise.
▶
Intelligent dosing system doses detergent or care
agent.
No error - normal operating noise.
▶
Intelligent dosing system performs a function test.
No error - normal operating noise.
▶
The appliance is not leveled properly.
Adjusting the device
▶
Advertisement
Table of Contents
